24%

Hanwha - NOA-E2PW8 - Access and Power Integration Solution, 8-door kit, Prewired for 1 (2-Door Network Controller (IC2) and 3 (Downstream Reader Interfaces (RI2M), includes eFlow6NB power supply/charger (10A @ 12/24VDC, network-managed), PDS8CB 8-out

Name: Hanwha - NOA-E2PW8 - Access and Power Integration Solution, 8-door kit, Prewired for 1 (2-Door Network Controller (IC2) and 3 (Downstream Reader Interfaces (RI2M), includes eFlow6NB power supply/charger (10A @ 12/24VDC, network-managed), PDS8CB 8-out
Brand: Hanwha Vision
SKU: NOA-E2PW8
Price: 3878.28 USD
Availability: InStock
Rating: 5.0 (10 reviews)

Product SKU: NOA-E2PW8

$3,878.28

~~$5,130.00~~

Description
Specifications
Downloads
Reviews

• 8-door kit
• Prewired for 1 × 2-Door Network Controller (IC2) and 3 × Downstream Reader Interfaces (RI2M)
• Includes eFlow6NB power supply/charger (10A @ 12/24VDC, network-managed)
• PDS8CB 8-output power distribution module (2.5A max per output, PTC protected)
• VR6 voltage regulator (up to 6A output)
• ACMS8CB 8-relay access control module (2.5A max per output, fused)
• Dual-voltage outputs for controllers and locking devices
• Factory-installed wire management and harness assemblies with terminal blocks
• 16 AWG galvanized steel backplane
• Convenient knockout configuration: 1 × 2" conduit, 16 × double knockouts for 1/2" & 3/4"
• Supervision for AC fail, battery fail/presence, and low power shutdown
• Accommodates up to four 12VDC/7AH batteries
• CE compliant
• Lifetime warranty on Altronix power supply/chargers and sub-assemblies
• Dimensions: 27.25" × 21.5" × 6.5" (692.2 × 546.1 × 165.1 mm)
• Controller and expansion panels sold separately

POWER SUPPLY / CHARGER (eFLOW104NB)
Input Fuse	6.3A/250V
Input Voltage	120VAC, 60Hz. 4.5A max
Output Voltage	24VDC @ 10A
Output Auxiliary	1A (unswitched)
Output Protection	Overvoltage protection. Filtered and regulated
Battery Charging Capacity	7AH/12VDC (2 within enclosure), 40AH/65AH (requires separate enclosure)
Battery Charging Type	Sealed lead acid or gel type
Battery Charging Failover	Upon AC loss, instantaneous (Batteries are sold separately)
Fire Alarm Disconnect Supervised	Latching or non-latching
Fire Alarm Disconnect EOL	10K Resistor
Supervision AC Failure	Form "C" contacts
Supervision Battery	Form "C" contacts
Supervision Low DC Power Shutdown	Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply) Prevents deep battery discharge
Indicators (LED) AC Output	120VAC is present
Indicators (LED) DC Output	24VDC is present
Indicators (LED) Battery	Discharged or not connected
DUAL INPUT ACCESS POWER CONTROLLER (ACMS8CB)
Input Voltage	24VDC from eFlow104NB and 12VDC from VR6
Input PTC's	9A
Output Voltage	24VDC
Outputs	Eight (8) independently controlled PTC outputs: a) Fail-Safe and/or Fail-Secure power outputs Form "C" Relays rated 28VAC or VDC @ 2.5A b) Auxiliary power outputs (unswitched) c) Any combination of the above
Output PTC's	2.5A
Indicators (Red LEDs)	Outputs are triggered (relays energized)
Indicators (Green LEDs)	FACP disconnect is triggered
VOLTAGE REGULATOR (VR6)
Output Voltage	12VDC
Output Current	6A continuous
Other	Surge suppression
Indicators (LED) Input	24VDC is present
DUAL INPUT POWER DISTRIBUTION MODULE (PDS8CB)
Input Voltage	24VDC from eFlow104NB and 12VDC from VR6
Input PTC's	9A
Output Voltage	12VDC and/or 24VDC
Outputs	• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2 • Individual outputs may be set to OFF position for servicing
Output PTC's	2.5A
Indicators (LED) DC Output	Eight (8) individual output LEDs Green: 12VDC Red: 24VDC
NOA-E2PW8 KIT
Agency Listings	All components of this Trove kit are UL Listed sub-assemblies. Please refer to the corresponding Sub-Assembly Installation Guides for further information.
CE	European Conformity
PHYSICAL AND ENVIRONMENTAL
Dimensions (H x W x D) Enclosure	27.25" x 21.5" x 6.5" (692.2mm x 546.1mm x 165.1mm)
Dimensions (H x W x D) Shipping	32.5" x 26.5" x 11.125" (825.5mm x 673.1mm x 282.6mm)
Product Weight (Approx.)	41.6lb. (18.87kg)
Shipping Weight (Approx.)	45.6lb. (20.68kg)
Operating Temperature	0°C to 49°C (32°F to 120°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Relative Humidity	85% +/- 5%
BTU/Hr (approx.)	145 BTU/Hr.

NOA-E2PW8_Datasheet_EN_60022233-22f9-4fd5-8ad5-7561be0be065.pdf:

NOA-E2PW8_Submittal_v3_a28b9d16-1890-444c-a3db-820d4998160e.pdf:

Hanwha - NOA-E2PW8 - Access and Power Integration Solution, 8-door kit, Prewired for 1 (2-Door Network Controller (IC2) and 3 (Downstream Reader Interfaces (RI2M), includes eFlow6NB power supply/charger (10A @ 12/24VDC, network-managed), PDS8CB 8-out

SECO-LARM - SD-8202GT-PEQ - Illuminated green 2" square "PUSH TO EXIT" button with built-in RF transmitter. Use with SECO-LARM 315MHz receivers. 9VDC Battery (included) operation with LED to indicate low battery. Stainless-steel single-gang plate.

SECO-LARM - SD-995A-D3Q - Weatherproof Door/Gate Strike, 12 VAC/VDC operation, fail-secure operation, one piece cast body, low current draw: 280mA@12VDC/140mA@24VDC, compatible with most locksets, extra wide keeper 15/8”

Akuvox - R27A-Aluminum - SIP Intercom with Keypad and RF Card reader

Uniview - OER-604 - Four Doors Access Controller

Uniview - OER-602 - Two Doors Access Controller

Uniview - OER-601 - One Door Access Controller

Uniview - OER-504 - Four Doors Access Controller

Uniview - OER-502 - Two Doors Access Controller

Uniview - OER-501 - One Door Access Controller

DA-FM2100 - Intercom Flush Mount - IDIS

Recently Viewed

Hanwha - NOA-E2PW8 - Access and Power Integration Solution, 8-door kit, Prewired for 1 (2-Door Network Controller (IC2) and 3 (Downstream Reader Interfaces (RI2M), includes eFlow6NB power supply/charger (10A @ 12/24VDC, network-managed), PDS8CB 8-out

Related products

Recently Viewed