{"product_id":"2-5g-sfp-managed-ethernet-switch","title":"Planet - IGS-5225-8P2T4S - Industrial L2+ 8-Port 10\/100\/1000T 802.3at PoE + 2-Port 10\/100\/1000T + 2-Port 100\/1G SFP + 2-Port 1G\/2.5G SFP Managed Ethernet Switch","description":"\u003cp\u003e\u003cstrong\u003eAdvanced Manageable PoE Solution for Hardened Environment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePLANET IGS-5225-8P2T4S PoE L2+Industrial Managed PoE+ Switch, featuring 8 10\/100\/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, two 10\/100\/1000BASE-T ports, two 100\/1000 BASE-X SFP ports and two 100\/1000\/2500 BASE-X SFP ports in an IP30 rugged metal case, can be installed in any difficult environment. It provides user-friendly yet advanced IPv6\/IPv4 management interfaces, abundantL2\/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRedundant Ring, Fast Recovery for Critical Network Applications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced \u003cstrong\u003eITU-T G.8032 ERPS (Ethernet Ring Protection Switching)\u003c\/strong\u003e technology, Spanning Tree Protocol (802.1s MSTP), and \u003cstrong\u003eredundant power\u003c\/strong\u003e input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 10ms.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHigh Power PoE for Security and Public Service Applications\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAs the whole system comes with a total \u003cstrong\u003e240-watt\u003c\/strong\u003e PoE budget, the IGS-5225-8P2T4S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11n\/ac\/ax) wireless LAN access points, PTZ (pan, tilt, zoom) speed dome network cameras and other PoE network devices.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIntelligent Alive Check for Powered Device\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-5225-8P2T4S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePoE Schedule for Energy Savings\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eUnder the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-5225-8P2T4S can effectively control the power supply besides its capability of giving high watts power. The built-in \u003cstrong\u003e“PoE schedule”\u003c\/strong\u003e function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eScheduled Power Recycling\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSMTP\/SNMP Trap Event Alert\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEffective Alarm Alert for Better Protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDigital Input and Digital Output for External Alarm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225-8P2T4S port shows link down, link up or power failure.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConvenient and Smart ONVIF Devices with Detection Feature\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePLANET has developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-5225-8P2T4S GUI, clients just need one click to search and show all of the ONVIF devices via network application. In addition, clients can upload floor images to the switch series making the deployments of surveillance and other devices easy for planning and inspection purposes. Moreover, clients can get real-time surveillance’s information and online\/offline status; the PoE reboot can be controlled from the GUI.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRobust Layer 2 Features\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-8P2T4S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 4K. Via aggregation of supporting ports, the IGS-5225-8P2T4S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 3 trunk groups with 6 ports per trunk group, and supports fail-over as well.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNetwork with Cybersecurity Helps Minimize Security Risks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S comes with enhanced cyber security to fend off cyber threats and cyber attacks. It supports SSHv2 and TLSv1.2 protocols to provide strong protection against advanced threats. Served as a key point to transmit data to customer's critical equipment in a business network, the cyber security feature of the IGS-5225-8P2T4S protects the switch management and enhances the security of the mission-critical network without any extra deployment cost and effort.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePowerful Security from Layer 2 to Layer 4\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S offers comprehensive Layer 2 to Layer 4 \u003cstrong\u003eAccess Control List (ACL)\u003c\/strong\u003e for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP\/UDP ports or defined typical network applications. Its protection mechanism also comprises \u003cstrong\u003e802.1x Port-based\u003c\/strong\u003e and \u003cstrong\u003eMAC-based\u003c\/strong\u003e user and device authentication. With the \u003cstrong\u003eprivate VLAN\u003c\/strong\u003e function, communication between edge ports can be prevented to ensure user privacy. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdvanced IP Network Protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S also provides \u003cstrong\u003eDHCP Snooping\u003c\/strong\u003e, \u003cstrong\u003eIP Source Guard\u003c\/strong\u003e and\u003cstrong\u003e Dynamic ARP Inspection\u003c\/strong\u003e functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eModbus TCP Provides Flexible Network Connectivity for Factory Automation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWith the supported \u003cstrong\u003eModbus TCP\/IP\u003c\/strong\u003e protocol, the IGS-5225-8P2T4S can easily integrate with\u003cstrong\u003e SCADA\u003c\/strong\u003e systems, \u003cstrong\u003eHMI\u003c\/strong\u003e systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s\u003cstrong\u003e operating information\u003c\/strong\u003e, \u003cstrong\u003eport informatio\u003c\/strong\u003en and \u003cstrong\u003ecommunication status\u003c\/strong\u003e, thus easily achieving enhanced monitoring and maintenance of the entire factory.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e1588 Time Protocol for Industrial Computing Networks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexibility and Extension Solution\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe two SFP ports built in the IGS-5225-8P2T4S support multi-speed,\u003cstrong\u003e 100BASE-FX\u003c\/strong\u003e, \u003cstrong\u003e1000BASE-SX\/LX\u003c\/strong\u003e and\u003cstrong\u003e 2500BASE-X \u003c\/strong\u003eSFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe distance can be extended from 550 meters (multi-mode fiber) to 10\/50\/70\/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIntelligent SFP Diagnosis Mechanism\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe IGS-5225-8P2T4S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures :\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePhysical Port\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 10\/100\/1000BASE-T\u003c\/strong\u003e Gigabit Ethernet RJ45 ports with \u003cstrong\u003eIEEE 802.3at PoE+\u003c\/strong\u003e injector function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 10\/100\/1000BASE-T\u003c\/strong\u003e Gigabit Ethernet RJ45 ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 100\/1000BASE-X SFP\u003c\/strong\u003e ports for SFP type auto detection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 100\/1000\/2500BASE-X SFP\u003c\/strong\u003e ports for SFP type auto detection\u003c\/li\u003e\n\u003cli\u003eOne RJ45 console interface for basic management and setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower over Ethernet \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComplies with IEEE 802.3at Power over Ethernet Plus\/end-span PSE\u003c\/li\u003e\n\u003cli\u003eUp to 8 IEEE 802.3af\/802.3at devices powered\u003c\/li\u003e\n\u003cli\u003eSupports PoE power up to 36 watts for each PoE port\u003c\/li\u003e\n\u003cli\u003eAuto detects powered device (PD)\u003c\/li\u003e\n\u003cli\u003eCircuit protection prevents power interference between ports\u003c\/li\u003e\n\u003cli\u003eRemote power feeding up to 100m\u003c\/li\u003e\n\u003cli\u003ePoE management features\u003cul\u003e\n\u003cli\u003ePoE admin-mode control \u003c\/li\u003e\n\u003cli\u003ePoE management mode selection\u003c\/li\u003e\n\u003cli\u003ePoE legacy mode selection\u003c\/li\u003e\n\u003cli\u003ePoE budget setup option\u003c\/li\u003e\n\u003cli\u003ePer port PoE function enable\/disable\u003c\/li\u003e\n\u003cli\u003ePoE port power feeding priority\u003c\/li\u003e\n\u003cli\u003ePer PoE port power limit\u003c\/li\u003e\n\u003cli\u003ePoE port status monitoring\u003c\/li\u003e\n\u003cli\u003ePD classification detection\u003c\/li\u003e\n\u003cli\u003eSequence port PoE\u003c\/li\u003e\n\u003cli\u003ePoE extend mode control to support power feeding up to a distance of up to 160 meters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntelligent PoE features\u003cul\u003e\n\u003cli\u003eTemperature threshold control\u003c\/li\u003e\n\u003cli\u003ePoE usage threshold control\u003c\/li\u003e\n\u003cli\u003ePoE schedule\u003c\/li\u003e\n\u003cli\u003ePD alive check\u003c\/li\u003e\n\u003cli\u003eLLDP PoE Neighbors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIndustrial Protocol\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMod bus TCP for real-time monitoring in the SCADA system\u003c\/li\u003e\n\u003cli\u003eIEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIndustrial Case and Installation\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIP30 aluminum case\u003c\/li\u003e\n\u003cli\u003eDIN-rail or wall-mount design\u003c\/li\u003e\n\u003cli\u003e48~56V DC, redundant power with reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eSupports 6KV DC Ethernet ESD protection\u003c\/li\u003e\n\u003cli\u003e-40 to 75 degrees C operating temperature\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDigital Input and Digital Output\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 digital input (DI)\u003c\/li\u003e\n\u003cli\u003e2 digital output (DO)\u003c\/li\u003e\n\u003cli\u003eIntegrate sensors into auto alarm system\u003c\/li\u003e\n\u003cli\u003eTransfer alarm to IP network via email and SNMP trap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLayer 3 IP Routing Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupports maximum 32 static routes and route summarization\u003c\/li\u003e\n\u003cli\u003eRouting interface provides per VLAN routing mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLayer 2 Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStorm Control support\u003c\/li\u003e\n\u003cli\u003eBroadcast \/ Multicast \/ Unicast\u003c\/li\u003e\n\u003cli\u003eSupports \u003cstrong\u003eVLAN\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eIEEE 802.1Q tagged VLAN\u003c\/li\u003e\n\u003cli\u003eSupports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) \u003c\/li\u003e\n\u003cli\u003ePrivate VLAN Edge (PVE)\u003c\/li\u003e\n\u003cli\u003ePort Isolation\u003c\/li\u003e\n\u003cli\u003eMAC-based VLAN\u003c\/li\u003e\n\u003cli\u003eIP Subnet-based VLAN\u003c\/li\u003e\n\u003cli\u003eProtocol-based VLAN\u003c\/li\u003e\n\u003cli\u003eVLAN Translation\u003c\/li\u003e\n\u003cli\u003eVoice VLAN\u003c\/li\u003e\n\u003cli\u003eGVRP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports\u003cstrong\u003e Spanning Tree Protocol\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eIEEE 802.1D Spanning Tree Protocol (STP)\u003c\/li\u003e\n\u003cli\u003eIEEE 802.1w Rapid Spanning Tree Protocol (RSTP)\u003c\/li\u003e\n\u003cli\u003eIEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN\u003c\/li\u003e\n\u003cli\u003eBPDU Filtering\/BPDU Guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports \u003cstrong\u003eLink Aggregation\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e802.3ad Link Aggregation Control Protocol (LACP)\u003c\/li\u003e\n\u003cli\u003eCisco ether-channel (static trunk)\u003c\/li\u003e\n\u003cli\u003eMaximum 6 trunk groups with 4 ports per trunk group\u003c\/li\u003e\n\u003cli\u003eUp to 8Gbps bandwidth (duplex mode) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eProvide sport mirror (many-to-1)\u003c\/li\u003e\n\u003cli\u003ePort mirroring to monitor the incoming or outgoing traffic on a particular port\u003c\/li\u003e\n\u003cli\u003eLoop protection to avoid broadcast loops\u003c\/li\u003e\n\u003cli\u003eSupports ERPS (Ethernet Ring Protection Switching)\u003c\/li\u003e\n\u003cli\u003eCompatible with Cisco \u003cstrong\u003eUni-directional link detection\u003c\/strong\u003e(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices\u003c\/li\u003e\n\u003cli\u003eLink Layer Discovery Protocol (LLDP) \u003c\/li\u003e\n\u003cli\u003eIEEE 802.3ah OAM\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuality of Service\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIngress Shaper and Egress Rate Limit per port bandwidth control\u003c\/li\u003e\n\u003cli\u003e8 priority queues on all switch ports\u003c\/li\u003e\n\u003cli\u003eTraffic classification\u003cul\u003e\n\u003cli\u003eIEEE 802.1p CoS\u003c\/li\u003e\n\u003cli\u003eIP TOS\/DSCP\/IP precedence\u003c\/li\u003e\n\u003cli\u003eIP TCP\/UDP port number\u003c\/li\u003e\n\u003cli\u003eTypical network application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrict priority and Weighted Round Robin (WRR) CoS policies\u003c\/li\u003e\n\u003cli\u003eSupports QoS and In\/Out bandwidth control on each port\u003c\/li\u003e\n\u003cli\u003eTraffic-policing on the switch port\u003c\/li\u003e\n\u003cli\u003eDSCP remarking\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMulticast\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupportsIPv4 IGMP snooping v1, v2 and v3\u003c\/li\u003e\n\u003cli\u003eSupports IPv6 MLD snooping v1 and v2\u003c\/li\u003e\n\u003cli\u003eQuerier mode support\u003c\/li\u003e\n\u003cli\u003eIPv4 IGMP snooping port filtering\u003c\/li\u003e\n\u003cli\u003eIPv6 MLD snooping port filtering\u003c\/li\u003e\n\u003cli\u003eMVR (Multicast VLAN Registration)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSecurity\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAuthentication\u003cul\u003e\n\u003cli\u003eIEEE 802.1x port-based\/MAC-based network access authentication\u003c\/li\u003e\n\u003cli\u003eBuilt-in RADIUS client to co-operate with the RADIUS servers\u003c\/li\u003e\n\u003cli\u003eTACACS+ login users access authentication\u003c\/li\u003e\n\u003cli\u003eRADIUS \/ TACACS+ users access authentication\u003c\/li\u003e\n\u003cli\u003eGuest VLAN assigns clients to a restricted VLAN with limited services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAccess Control List\u003cul\u003e\n\u003cli\u003eIP-based Access Control List (ACL)\u003c\/li\u003e\n\u003cli\u003eMAC-based Access Control List\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSource MAC\/IP address binding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDHCP Snooping\u003c\/strong\u003e to filter un-trusted DHCP messages\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic ARP Inspection\u003c\/strong\u003e discards ARP packets with invalid MAC address to IP address binding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP Source Guard\u003c\/strong\u003e prevents IP spoofing attacks\u003c\/li\u003e\n\u003cli\u003eIP address access management to prevent unauthorized intruder\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManagement\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIPv4 and IPv6 dual stack management\u003c\/li\u003e\n\u003cli\u003eSwitch Management Interfaces\u003cul\u003e\n\u003cli\u003eWeb switch management\u003c\/li\u003e\n\u003cli\u003eConsole and Telnet Command Line Interface \u003c\/li\u003e\n\u003cli\u003eSNMP v1 and v2c switch management\u003c\/li\u003e\n\u003cli\u003eSSHv2, TLSv1.2 and SNMPv3 secure access\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSNMP Management\u003cul\u003e\n\u003cli\u003eFour RMON groups (history, statistics, alarms, and events) \u003c\/li\u003e\n\u003cli\u003eSNMP trap for interface Link Up and Link Down notification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPv6\u003c\/strong\u003e IP Address\/NTP\/DNS management\u003c\/li\u003e\n\u003cli\u003eBuilt-in Trivial File Transfer Protocol (TFTP) client\u003c\/li\u003e\n\u003cli\u003eBOOTP and DHCP for IP address assignment\u003c\/li\u003e\n\u003cli\u003eSystem Maintenance\u003cul\u003e\n\u003cli\u003eFirmware upload\/download via HTTP\u003c\/li\u003e\n\u003cli\u003eReset button for system reboot or reset to factory default\u003c\/li\u003e\n\u003cli\u003eDual Images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDHCP Relay and DHCP Option82\u003c\/li\u003e\n\u003cli\u003eDHCP Server\u003c\/li\u003e\n\u003cli\u003eUser Privilege levels control\u003c\/li\u003e\n\u003cli\u003eNTP (Network Time Protocol)\u003c\/li\u003e\n\u003cli\u003eUPnP\u003c\/li\u003e\n\u003cli\u003eNetwork Diagnostic\u003cul\u003e\n\u003cli\u003eICMPv6\/ICMPv4 Remote Ping\u003c\/li\u003e\n\u003cli\u003eCable Diagnostic technology provides the mechanism to detect and report potential cabling issues\u003c\/li\u003e\n\u003cli\u003eSFP-DDM (Digital Diagnostic Monitor)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSMTP, Syslog and SNMP trap remote alarm\u003c\/li\u003e\n\u003cli\u003eLocal system Log\u003c\/li\u003e\n\u003cli\u003ePLANET NMS System and Smart Discovery Utility for deployment management\u003c\/li\u003e\n\u003cli\u003eProvides ONVIF for co-operating with PLANET video IP surveillances\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Planet","offers":[{"title":"Default Title","offer_id":47904576635131,"sku":"IGS-5225-8P2T4S","price":816.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0779\/5032\/0891\/files\/1_15.jpg?v=1769670325","url":"https:\/\/cctvbestbuys.com\/products\/2-5g-sfp-managed-ethernet-switch","provider":"CCTVBestBuys","version":"1.0","type":"link"}